We know it seems like a straightforward process, but there’s a couple of installing/uninstalling tips we’d like to share so you have the best experience with NimbleSleeve.

Installing should take no more than 15 seconds, so bare with us.

Note:

Please make sure your NimbleSleeve corresponds to the appropriate Apple Pencil (Gen 1 or Gen 2) for an exact fit.

Note:

Ensure your Apple Pencil has been quickly wiped down with a dust cloth before starting.

Step 1: Insert Apple Pencil

IMPORTANT

The key is to continuously grab NimbleSleeve near the front opening so that the Apple Pencil can slide in as smoothly as possible.

With one hand on the end of the Apple Pencil and another on the tip opening of NimbleSleeve, push NimbleSleeve through.

Tip:

NimbleSleeve’s precise fit may provide a bit of resistance. Lightly dab baby powder on Nimblesleeve’s interior if it’s too difficult.

Step 2: Push in all the way

Still gripping NimbleSleeve near the tip opening, push the Apple Pencil through until the tip has passed through the front opening.

Step 3: Cover the cap

Finally, pull the end of NimbleSleeve over your Apple Pencil and massage the sleeve into place if needed.

Remove NimbleSleeve from your Apple Pencil

Step 1: Pull the cap back

Pull the end of NimbleSleeve behind the Apple Pencil to create an area for your fingers to grab your Apple Pencil.

Step 2: Keep pulling

Slowly pull the Apple Pencil out while keeping your fingers on each side of the NimbleSleeve crease.
You might feel some resistance when removing and that’s normal too.

Having trouble with this?

Send us a message at cs@gouppercase.com or visit our Contact Us page.